TCT is a recognized leader in precision slitting.  TCT's slitters are capable of slitting coils up to .250 thick & 60" wide.  TCT provides tightly wound coils with exacting width, camber & burr tolerances that are closer than industry standards.

 
SLITTERS
 
63" Faspar
  • Gauge : .012 / .156
  • Width : Entry 10.000 / 64.000
                  Exit 1.500 / 63.000
  • Mass : 1.500 Max
  • ID-Uncoiler : 20" / 24"
  • ID-Recoiler : 20" / 24"
  • PVC
  • OD-Uncoiler : 78" Max
  • OD-Recoiler : 72" Max
  • Line Speed : 400' Per Min Max
                             200' Per Min Avg.
  • Uncoiler Mx : 30,000# Max
  • Recoiler Mx : 26,500# Max
 
24" SECO
  • Gauge : .025 / .100
  • Width : .375 / 24.500
  • Mass : .600 Max -do not go higher than this
  • ID-Uncoiler : 16" / 20" / 24"
  • ID-Recoiler : 16" / 20"
  • PVC
  • OD-Uncoiler : 72" Max
  • OD-Recoiler : 60" Max
  • Line Speed : 400' Per Min Max
                             175' Per Min Avg.
  • Uncoiler Mx : 10,000# Max
  • Recoiler Mx : 10,000# Max
 
18" YODER
  • Gauge : .005 /.035
  • Width : .250 / 15.500
  • Mass : .187 Max – no. 1 coil at time
  • ID-Uncoiler : 16" / 20" / 24"
  • ID-Recoiler : 16" / 20"
  • #5 Edge to 3" Max
  • NO PVC - possible application, but at great risk of quality issues.
  • OD-Uncoiler : 60" Max
  • OD-Recoiler : 51" Max
  • Line Speed : 400' Per Min Max
                             150' Per Min Avg.
  • Uncoiler Mx : 5,000# Max
  • Recoiler Mx : 5,000# Max
 
 
16" SUNDWIG
  • Gauge : .075 / .250
  • Width : .500 / 15.500
  • Mass : 1.500 Max
  • D-Uncoiler : 20"
  • ID-Recoiler : 20" / 24"
  • Sizes based on available knives
  • Knive sizes: .365-.470-.560-.585-.720
  • OD-Uncoiler : 60" Max
  • OD-Recoiler : 60" Max
  • Line Speed : 200' Per Min Max
                             100' Per Min Avg.
  • Uncoiler Mx : 10,000# Max
  • Recoiler Mx : 10,000# Max
TO CALCULATE SIZES WE CAN SLIT ON THE (16" SUNDWIG)
Find the gauge you are slitting on the tolerance chart.
Multiply gauge by .08 this will give the approx.
amount of oversize you will need to start with.

EXAMPLE: to slit .125 x .500 multiply .08 x .125 = .010 add .010 to the slit size .500 + .010 = .510 subtract slitting tolerance from this size .510 - .044 = .466 we would need a knife approx. .466- .470 to slit .500 + or - .005.
 
24New
  • Gauge : .006 / .045
  • Width : .500 / 25.5
  • Mass : .500 MAX
  • Max Coil : 10,000#
  • ID-Uncoiler : 16" / 20"
  • ID-Recoiler : 20" / 16"
  • Max OD : 57” ABSOLUTE
  • PVC
 
60" PRO ECO
  • Gauge : .010 / .125
                  Carbon = .165
  • Width : .500 / 60.000
  • Mass : .650 Max
  • ID-Uncoiler : 16" / 20" / 24"
  • ID-Recoiler : 20"
  • OD-Uncoiler : 65" Max
  • OD-Recoiler : 63" Max
  • Line Speed : 500' Per Min Max
  • Uncoiler Mx : 25,000# Max
  • Recoiler Mx : 20,000# Max
  • 20' Looping pit
 
24" YODER
  • Gauge : .010 / .075
                   Carbon = .090
  • Width : .250 / 24.000
  • Mass : .250 Max
  • ID-Uncoiler : 16" / 20" / 24"
  • ID-Recoiler : 16" / 20"
  • OD-Uncoiler : 60" Max
  • OD-Recoiler : 54" Max
  • Line Speed : 600' Per Min Max
  • Uncoiler Mx : 10,000# Max
  • Recoiler Mx : 10,000# Max
  • 20' Looping pit
 
15" Ruesch
  • Gauge : .010 / .040
  • Width : .150 / 15.000
  • Mass : .125 Max
  • ID-Uncoiler : 15" / 20"
  • ID-Recoiler : 16" FCL only
  • 8 cuts max
  • OD-Uncoiler : 60" Max
  • OD-Recoiler : 60" Max
  • Line Speed : 300' Per Min Max
  • Uncoiler Mx : 4,000# Max
  • Recoiler Mx : 3,000# Max
 

This website designed and maintained by IGD Solutions Corporation